Hệ thống gá kẹp phôi Zeropoint Series C cho máy cắt dây EDM

Posted on Posted in Hệ thống gá kẹp Zeropoint TSG cho máy cắt dây EDM
Model Description Dimension
ZP-024120 Features:   
Clamps medium-small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible. Bottom level of workpiece is zero or +5mm
Clamping range: Medium-small workpiece up to 10kg
Consist of:
ZP-024020   BASE C – 155 / 8.5   1 pc
ZP-024121   Clamping Head  C   1 pc
ZP-029303   Spacer for CLAMP C  – 8.5   1 pc
 
ZP-034120 Features:   
Clamps medium-small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible. Bottom level of workpiece is zero or +5mm
Fine adjustment in C direction possible using adjust bolt on the tilting base.
Clamping range: Medium-small workpiece up to 10kg 
Consist of:
ZP-024030   TILTING BASE       1 pc
ZP-024121   Clamping Head  C   1 pc
ZP-029303   Spacer for CLAMP C  – 8.5   1 pc
 
ZP-024200  Features:   
Clamps medium-small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible.Bottom level of workpiece is zero or +5mm.
Clamping range: Medium-small workpiece up to 10kg
Consist of:
ZP-024020   BASE C  – 155 / 8.5   1 pc
ZP-024201   CLAMP C – 200 / 25   1 pc
 
ZP-024300 Features:
Clamp the round work-piece by bar and v-block with fine adjustment of ZX and ZY surface / Z=0 or Z=+5 from bottom surface of work-piece
Clamping range: Medium-small workpiece up to 10kg
Consist of:
ZP-024020 BASE C – 155 / 8.5      1pc
ZP-024201 CLAMP C – 200/25      1pc
ZP-024205 BAR C – 250/25     1pc
ZP-029512 V-Block Clamp      1pc
ZP-029513 V-Block support     1pc
 
ZP-034200 Features:
Clamps medium-small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible.Bottom level of workpiece is zero or +5mm.
Fine adjustment in C direction possible using adjust bolt on the tilting base.
Clamping range: Medium-small workpiece up to 10kg( 0~150mm)
Consist of:
ZP-024030   TILTING BASE    1 pc
ZP-024201   CLAMP C – 200 / 25   1 pc
 
ZP-034300 Features:
 Clamp the round work-piece by bar and v-block with fine adjustment of ZX and ZY surface / Z=0 or Z=+5 from bottom surface of work-piece
Fine adjustment in C direction possible using adjust bolt on the tilting base.
Clamping range: Medium-small workpiece up to 10kg( 0~150mm)
Consist of:
ZP-024030 TILTING BASE       1pc
ZP-024201        1pc
ZP-029303     1pc
ZP-029512 V-Block      1pc
ZP-024205 Bar     1pc
 
 ZP-024150 Features:   
Fine adjustment in ZX, ZY plane possible after clamping a medium-small workpiece’s flank. The junction between the vice and the workpiece is made in downstream profile, preventing the workpieces from getting out of position. 
Clamping range: Medium-small workpiece up to 10kg (0~150mm)
Consist of:
ZP-024020   BASE C – 155 / 8.5       1 pc
ZP-024151   VISE  C – 150 / 25   1 pc
 
ZP-034150 Features:
Fine adjustment in ZX, ZY plane possible after clamping a medium-small workpiece’s flank. The junction between the vice and the workpiece is made in downstream profile, preventing the workpieces from getting out of position. Fine adjustment in C direction possible using adjust bolt.
Clamping range: Medium-small workpiece up to 10kg( 0~150mm)
Consist of:
ZP-024030   TILTING BASE       1 pc
ZP-024151   VISE  C – 150 / 25   1 pc
 
ZP-025150  Features:
Fine adjustment in ZX,ZY plane possible after clamping medium-small workpiece’s flank. Vise is operated by Toggle clamp, Toggle joint, depending on the size of the workpiece to move. 
Clamping range: Medium-small workpiece up to 10kg(0~150mm)
Consist of:
ZP-024020    1 pc
ZP-035151     1 PC
 
 ZP-035150 Features:   
Fine adjustment in ZX,ZY plane possible after clamping medium-small workpiece’s flank. Vise is operated by Toggle clamp, Toggle joint, depending on the size of the workpiece to move. Fine adjustment in C direction possible using adjust bolt on the tilting base.
Clamping range: Medium-small workpiece up to 10kg(0~150mm)
Consist of:
ZP-024030   TILTING BASE       1 pc
ZP-035151    TOGGLE CLAMPING  VISE 150   1 PC
 
 ZP-036060 Features:
Clamps medium-small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible. Fine adjustment in C direction possible using adjust bolt. Bottom level of workpiece is zero or +5mm
Clamping range: Medium-small workpiece up to 10kg
Consist of:
ZP-024030   TILTING BASE    1 pc
ZP-036061   Clamping Head  C – 15   1 pc
ZP-036062   CLAMP C – 15 / 65   1 pc
 
ZP-036120  Features:
Clamps medium-small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible. Fine adjustment in C direction possible using adjust bolt. Bottom level of workpiece is zero or +5mm
Clamping range: Medium-small workpiece up to 10kg
Consist of:
ZP-024030   TILTING BASE       1 pc
ZP-036121   Clamping Head  C   1 pc
ZP-036122   CLAMP C – 45 / 120   1 pc
 
ZP-032080 Features:
Fine adjustment in ZX, ZY plane possible after clamping a small workpiece’s flank. The junction between the vice and the workpiece is made in downstream profile, preventing the workpieces from getting out of position. Fine adjustment 
in C direction possible using adjust bolt.
Clamping range: Small workpiece up to 1kg( 0~79mm )
Consist of:
ZP-024030   TILTING BASE       1 pc
ZP-032081   VISE  A – 80 / 8 – R   1 pc
 
ZP-033050 Features:
Clamps medium-small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible. Fine adjustment in C direction possible using adjust bolt. Bottom level of workpiece is +5mm
Clamping range: Medium-small workpiece up to 5kg
Consist of:
ZP-024030   TILTING BASE     1 pc
ZP-033051   CLAMP B -100 / 8.5   1 pc
 
ZP-033060 Features:
Clamps round or medium-small cubic workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible. Fine adjustment in C direction possible using adjust bolt.
Clamping range: Medium-small workpiece up to 4kg
Consist of:
ZP-024030  TILTING BASE    1 pc
ZP-033061  CLAMP B – 62 / 8.5   1 pc