Hệ thống gá kẹp phôi Zeropoint Series A cho máy cắt dây EDM

Posted on Posted in Hệ thống gá kẹp Zeropoint TSG cho máy cắt dây EDM
Model Description Dimension
ZP-022040 Features:
Clamps small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible.
Bottom level of workpiece is +5mm.
Clamping range: Small workpiece up to 1kg
Consist of:
ZP-022010   BASE A  – 110 / 7   1 pc
ZP-022051   CLAMP A – 50 / +5   1 pc
 
 ZP-022050  Features:
Clamps small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane possible. 
Bottom level of workpiece is 0.
Clamping range: Small workpiece up to 1kg
Consist of:
ZP-022010   BASE A  – 110 / 7   1 pc
ZP-022052   CLAMP A – 50 / 0   1 pc
 
 ZP-022060  Features:
Clamps round or small cubic workpieces in up-down direction and makes fine adjustment of 
ZX, ZY plane possible.
Clamping range: Small workpiece up to 1kg
Consist of:
ZP-022010   BASE A  – 110 / 7   1 pc
ZP-022045   CLAMP A – 45    1 pc
 
 ZP-022070  Features:   
 Clamps small workpieces in up-down direction and makes fine adjustment of ZX, ZY plane 
possible. Bottom level of workpiece is +5mm.
Clamping range: Small workpiece up to 3kg
Consist of:
ZP-022010   BASE A  – 110 / 7    1 pc
ZP-022061   CLAMP A – 80 / +4   1 pc
 
ZP-022080 Features:   
Fine adjustment in ZX, ZY plane possible after clamping a small workpiece’s flank. The junction between the vice and the workpiece is made in downstream profile, preventing the workpieces from getting out of position. 
Clamping range: Small workpiece up to 1kg( 0~79mm )
Consist of:
ZP-022010   BASE A  – 110 / 7   1 pc
ZP-022081   VISE  A – 80 / 8 – R   1 pc
 
ZP-022090  Features:   
Fine adjustment in ZX, ZY plane possible after clamping a small workpiece’s flank. The junction between the vice and the workpiece is made in downstream profile, preventing the workpieces from getting out of position. 
Clamping range: Small workpiece up to 1kg( 0~79mm )
Consist of:
ZP-022010   BASE A  – 110 / 7   1 pc
ZP-022091   VISE  A – 80 / 8 – L   1 pc
 
ZP-022100 Features:
Fine adjustment in ZX, ZY plane possible after clamping a small workpiece’s flank. The junction between the vice and the workpiece is made in downstream profile, preventing the workpieces from getting out of position. 
Clamping range: Small workpiece up to 2kg( 0~100mm )
Consist of:
ZP-022010   BASE A  – 110 / 7   1 pc
ZP-022101   VISE  A – 100 / 10 – R   1 pc
 
 ZP-022110  Features:   
Fine adjustment in ZX, ZY plane possible after clamping a small workpiece’s flank. The junction between the vice and the workpiece is made in downstream profile, preventing the workpieces from getting out of position. 
Clamping range: Small workpiece up to 2kg( 0~100mm )
Consist of:
ZP-022010   BASE A  – 110 / 7   1 pc
ZP-022102   VISE  A – 100 / 10 – L   1 pc