Camera Cognex In-Sight 5600/5705

Posted on Posted in Camera công nghiệp Cognex
In-Sight 5705 In-Sight 5705C
GUI Interface Spreadsheet and EasyBuilder
Minimum Firmware Requirement In-Sight Explorer 5.1.0
Bộ nhớ lập trình 128MB non-volatile flash memory; unlimited storage via remote network device
Bộ nhớ xử lý hình ảnh 512MB SDRAM
Kiểu cảm biến 2/3-inch CCD, global shutter
Phân giải lớn nhất (pixels)  2448 x 2048
Số khung hình/giây 16 full frames per second 14 full frames per second
Ống kính C-Mount
Discrete Inputs 1 opto-isolated, acquisition trigger input. Additional inputs available using a compatible I/O module. Unlimited inputs when using an Ethernet I/O system
Discrete Outputs 2 built-in, high-speed outputs. Additional outputs available using a compatible I/O module. Unlimited outputs when using an Ethernet I/O system
Chỉ thị LEDs Power, Network Status, Network Traffic, 2 user configurable
Kết nối mạng 1 Ethernet port, 10/100/1000 BaseT with auto MDIX. IEEE 802.3 TCP/IP protocol
Cổng kết nối Serial RS-232C
Ethernet Protocols EtherNet/IP; PROFINET; Modbus/TCP; Melsec; TCP/IP; SMTP; FTP
Điện áp 24VDC ±10%, 600mA maximum
Vật liệu vỏ máy Nhôm đúc
Kích thước máy 134.4mm (5.29in) x 124.1mm (4.88in) x 61.4mm (2.42in) with lens cover installed
Connector type M12 Ethernet, M12 Power/IO
Chuẩn bảo vệ IP 67 with lens cover on

Thông số kỹ thuật In-Sight 5600

Model Speed Image Capture
Rate (FPS)
Resolution
(in pixels)
User Interface Vision Tools
In-Sight 5605 20x 16 2448 x 2048 EXEB EXIP
In-Sight 5604 20x 44k lines 1K line scan EXEB EXIP
In-Sight 5603 20x 14 1600 x 1200 EXEB EXIP
In-Sight 5600 20x 60 640 x 480 EXEB EXIP
ID ONLY MODELS
In-Sight 5615 20x 16 2448 x 2048 EXEB I
In-Sight 5614 20x 44k lines 1K line scan EXEB I
In-Sight 5610 20x 60 640 x 480 EXEB I
In-Sight 5613 20x 14 1600 x 1200 EXEB I

Notes:

  1. User Interface:
    EX In-Sight Explorer spreadsheet programming environment
    EB EasyBuilder interface
  2. Supported Tools:
    C Color model available (color tool sets vary).
    E Essential Tool Set includes: blob, edge, curve and line finding, histogram and geometry tools, image filters, pattern matching, and standard calibration.
    X Extended Tool Set includes: non-linear calibration and caliper tool. PatMax® option available.
    P PatMax available.
    I ID Tool Set includes: 1-D/2-D barcode reading and verification, text reading and verification (OCR/OCV) and image filters.