Petronas hydraulic oil

Posted on azcomPosted in Lubricants and Grease, Products

“PETRONAS Hydraulic Series are high performance anti-wear hydraulic fluids specially developed for a wide range of mobile and industrial hydraulic equipment operating under normal to heavy duty conditions.”PETRONAS Hydraulic Series are high performance anti-wear hydraulic fluids specially developed for a wide range of mobile and industrial hydraulic equipment operating under normal to heavy duty conditions.Formulated with high quality selected base oils enhanced with advanced anti-wear, anti-oxidant, anti-rust and anti-foam additives, PETRONAS Hydraulic fluids provide high anti-wear protection, smooth operation of the hydraulic system and up to 3x longer lasting performance*.”

Applications

PETRONAS Hydraulic Series are recommended for use in: ” various mobile hydraulic and industrial hydraulic systems operating under normal to heavy duty conditions hydraulic systems demanding high quality anti-wear fluids” “Conditionally they may also be used in circulation, splash, bath and ring oiling systems feeding lubricant to gears and bearings. However please consult our local Technical Service Team and/orOEM manual before application.” “For applications where premium performance anti-wear hydraulic fluids are required, PETRONASHydraulic PLUS Series is recommended.”

 

Characteristic Method Specification 10 15 22 32
Specific Gravity @15°C ASTM D 4052 (1) 0.856 0.860 0.868 0.871
Kinematic Viscosity at 40°C, cSt ASTM D 445 ±10% 10 15 22 32
Kinematic Viscosity at 100°C, cSt ASTM D 445 ** 2.7 3.4 4.3 5.4
Viscosity Index ASTM D 2270 (1) 108 98 101 102
Flash Point, °C ASTM D 92 Report 150 150 170 220
Pour Point, °C ASTM D 97 ** -39 -39 -36 -33
TAN, mgKOH/g ASTM D 664 (1) 0.60 0.60 0.60 0.60
FZG, Stages Passed ISO 14635-1 Min. 10 12 12 12 12
Water Separability, 40/37/3 – mins ASTM D 1401 ** 10 10 10 15
Copper Strip Corrosion ASTM D 130 Max. 2 1b 1b 1b 1b
TOST life, hours ASTM D 943 Min. 1000 3900 3900 3900 3900
Foam Sequence I, mL
Foam Sequence II, mL Foam Sequence III, mL		 ASTM D 892 Max. 150/0
Max. 75/0 Max. 150/0		 0/0
0/0
0/0		 0/0
0/0
0/0		 0/0
0/0
0/0		 0/0
0/0
0/0

 

Characteristic Method Specification 46 68 100 150
Specific Gravity @15°C ASTM D 4052 (1) 0.877 0.883 0.886 0.890
Kinematic Viscosity at 40°C, cSt ASTM D 445 ±10% 46 68 100 150
Kinematic Viscosity at 100°C, cSt ASTM D 445 ** 6.8 8.7 11.2 14.7
Viscosity Index ASTM D 2270 (1) 102 99 97 97
Flash Point, °C ASTM D 92 Report 220 230 240 240
Pour Point, °C ASTM D 97 ** -33 -30 -27 -27
TAN, mgKOH/g ASTM D 664 (1) 0.60 0.60 0.60 0.60
FZG, Stages Passed ISO 14635-1 Min. 10 12 12 12 12
Water Separability, 40/37/3 – mins ASTM D 1401 ** 15 15 30 30
Copper Strip Corrosion ASTM D 130 Max. 2 1b 1b 1b 1b
TOST life, hours ASTM D 943 Min. 1000 3900 3900 3900 3900
Foam Sequence I, mL Foam Sequence II, mL
Foam Sequence III, mL		 ASTM D 892 Max. 150/0 Max. 75/0
Max. 150/0		 0/0
0/0
0/0		 0/0
0/0
0/0		 0/0
0/0
0/0		 0/0
0/0
0/0

 

Related Products