Mico LYS series Quick mold clamp system for IMM
Mainly used for a non-standard mold in the injection molding machine without T-groove.
• A guide block allows the clamp moving forward / backward for an easy operation.
• Like LY type, the pressure is primarily increased by the cylinder, and secondarily by the lever.
• Durable and safe
| Item/ Type | LYS-1 | LYS-2 | LYS-4 | LYS-6 | LYS-10 |
| Internal Pressure(kgf/㎠) | 275 | ||||
| Maximum Operating Pressure(kgf/㎠) | 185 | ||||
| Commercial Clamping Force(ton) | 1 | 2 | 4 | 6 | 10 |
| Stroke (mm) | 3.7 | 5 | 5 | 7 | 8 |
| Required Flow Rate(㎖) | 3 | 6 | 14 | 28 | 65 |
| Operating Temperature(℃) | -5 ~ 60℃ | ||||
| Oil | Common Hydraulic Oil (ISO VG 32~46) | ||||
| Injection Molding M/C | 15-50 TON | 100 TON | 250 TON | 350 TON | 450-550TON |
| Clamp | LYS1T | LYS2T | LYS4T | LYS6T | LYS10T |
| Q’ty | 8EA | 8EA | 8EA | 8EA | 8EA |
