Mico TK Series Quick mold clamp system for IMM
Mainly used in a heavy and large injection molding machine.
A high clamping force is safely maintained even if there is no hydraulic pressure.
• The lever is stuck out of the clamp body in clamping, and retracted into the clamp body in unclamping.
• A mold shall be standardized.
• Use a hoist or cart to change a mold.
| Item/ Type | TK-25 | TK-40 |
| Clamping Force (ton) Hydraulic 185kg/cm3) | 8 TON | 14 TON |
| Retention Force (ton) Hydraulic 185kg/cm3) | 25TON (Max31TON) | 40 TON (Max50TON) |
| Forward Stroke (mm) | 4.5 | 5.5 |
| Clamp Stroke (mm) | 2 | 2.5 |
| Safe Stroke (mm) | 2.5 | 3 |
| Require Flow Rate (ml) | 460 | 859 |
| Injection Molding M/C | 1000~1300TON | 2000~2500TON |
| Clamp | TK25T | TK40T |
| Q’ty | 8EA | 8EA |
