Tilting NC rotary table Kitagawa TT series
説明：
5軸5面加工が可能
コンパクトなデザイン
技術仕様：
| Model | TT101 | TW120 | ||
|---|---|---|---|---|
| Tilting Angle Range | -20°～+120° | -20°～+110° | ||
| Table Diameter (mm) | ø110 | ø125 | ||
| Centre Hole Diameter (mm) | ø50H7 | ø60H7 | ||
| Through Hole Diameter (mm) | ø32 | ø32 | ||
| Centre Height (mm) | 140 | 150 | ||
| Clamping Method | Pneumatic | Pneumatic | ||
| Clamping Torque (N･m) (at 0.5 MPa) |
Rotating axis | 180 | 120 | |
| Tilting axis | 300 | 200 | ||
| Motor Axis Reduced Inertia (kg･m2) |
Rotating axis | 0.000082 | 0.000072 | |
| Tilting axis | 0.000081 | 0.000034 | ||
| Servomotor (for Fanuc spec.) |
Rotating axis | αiF 1/5000-B | αiF 2/5000-B | |
| Tilting axis | αiF 2/5000-B | αiF 2/5000-B | ||
| Total Reduction Ratio | Rotating axis | 1/72 | 1/90 | |
| Tilting axis | 1/120 | 1/180 | ||
| Max. Rotation Speed (min-1) |
Rotating axis (at motor 3000 min-1) |
41.6 | 33.3 | |
| Tilting axis (at motor 3000 min-1) |
25 | 16.6 | ||
| Allowable Work Inertia (kg･m2) | 0.05 | 0.06 | ||
| Indexing Accuracy (sec) | Rotating axis | 30 | 30 | |
| Tilting axis | 60 | 60 | ||
| Repeatability (sec) | 4 | 4 | ||
| Mass of Product (kg) | 73 | 105 | ||
| Allowable Load | at horizontal (kg) | 35 | 35 | |
| at tilted (kg) | 20 | 20 | ||
| Built-in Rotary Joint (as an option) | RJ32-10T05 Hydraulic/Pneumatic 3 ports |
RJ32-12T08 Hydraulic/Pneumatic 3 ports |
||
