柔軟な統合組立システム SMC FMS-200
Each station of FMS-200 carries out one part of the process.
• FMS-201: Body supply
In this station, the base which acts as the support to the assembled product is fed. >> (more)
• FMS-202: Bearing selection/ supply
In this station, the bearing is assembled in the base housing. Bearings with different heights can be selected.>> (more)
• FMS-203: Hydraulic press
This phase of the press fits bearing inserted in the previous station using a hydraulic ram. >> (more)
• FMS-204: Shaft selection/ supply
The shaft is inserted into the product. There are two types of shafts manufactured from different materials: aluminium and nylon. >> (more)
• FMS-205: Cover selection/ supply
This station inserts a lid on the set of parts. There are 6 different types of lids: depending on material, colour and height. >> (more)
• FMS-206: Screws supply
This station inserts four screws in the base of the workpiece. >> (more)
• FMS-207: Robotized screwing
The seventh FMS-200 station integrates robotics technology. The robot screws in the four screws inserted in the product by the previous station. In addition, shaft and lid assembly exchange operations can be carried out. >> (more)
• FMS-208: Automatic warehouse
This station stores the finished products. >> (more)
• FMS-209: Paint drying in oven
During this phase of the assembly a paint drying process is simulated using a polycarbonate oven. >> (more)
• FMS-210: Quality control using artificial vision
The incorporation of this station in the FMS-200 family represents the integration of the artificial vision technology via artificial vision. The workpiece is transferred to the inspection position in which an artificial vision camera examines it against a known good part. Size, shape, missing holes can all be verified. >> (more)
