Ultra compact NC rotary table Kitagawa CK(R) series
기술:
초소형 본체 및 최소 풋 프린트 NC 회전 테이블
트러 니온 지그와 함께 사용하기에 적합
블록리스 로터리 조인트 (CKR160 및 CKR200)
소형 머시닝 센터에 적합
기술 사양:
| Model | MX160 | |
| Right-handed type | × | |
| Left-handed type | ○ | |
| Table Diameter (mm) | ø165 | |
| Centre Hole Diameter (mm) | ø50H7 | |
| Through Hole Diameter (mm) | ø40 | |
| Centre Height (mm) | 140 | |
| Clamping Method | Pneumatic | |
| Clamping Torque (N･m) (at 0.5 MPa) |
310 | |
| Motor Axis Reduced Inertia (kg･m2) | 0.00023 | |
| Servomotor (for Sanyo spec.) | R2AA08075FXPGPM6 | |
| Total Reduction Ratio | 1/40 | |
| Max. Rotation Speed (min-1) | 75 (at motor 3000min-1) |
|
| Allowable Work Inertia (kg･m2) | 0.25 | |
| Indexing Accuracy (sec) | 40 | |
| Repeatability (sec) | 8 | |
| Mass of Product (kg) | 43 | |
| Allowable Load | Horizontal (kg) | 80 |
| Vertical (kg) | 40 | |
| Manual Tailstock (as an option) | MR160RN | |
| Tail Spindle (as an option) | MSR142A/TSR142A | |
| Rotary Joint (as an option) | RJ40H16P01 Hydraulic/Pneumatic 4 ports |
|
