Kẹp thủy lực tự động MICO QMC – SY style

Posted on Posted in Hệ thống kẹp khuôn nhanh cho máy dập, Hệ thống kẹp khuôn, thay khuôn nhanh, Sản phẩm

Features

• Generally used in press mainly when the slide area and a mold are small.

• Use T-groove to easily change a mold.

• mold shall have U-groove.

• Use a horseshoe block to adjust the clamping height of a non-standard mold.

• Customization is available for the specific conditions of mold and press.

*Specifications:

                                                                  Type

Item

SY-2 SY-4 SY-6 SY-10 SY-16
Internal Pressure(kgf/aif) 275
Maximum Operating Pressure(kgf/cnf) 185
Commercial Clamping Force(ton) 2.0 42 6.0 10.5 16.8
Stroke (mm) 5 5 7 8 8
Required Flow Rate(mfi) 5.6 11.7 24.2 46.7 74.8
Operating TemperaturefC) -5~60t
Oil Common Hydraulic Oil (ISO VG 32-46)
Weight(kg)* 1.2 2.2 3.5 6.3 12.2

Weight at H = 100mm

                                                         Item
Type
a b d F G J Flow Rate
UNCLAMP CLAMP
SY-2 2 3.5 18 58 49 12 38 5.6 4.3
SY-4 2 3.5 25 73 59 13 59 11.7 7.5
SY-6 3 4.5 30 88 67 15 64 24.2 15.6
SY-10 3 5.5 40 108 77 15 79 46.7 29.2
SY-16 3.5 5 50 146 87 15 89 74.8 46.7