Auto clamp SY – MICO QMC
Features
• Generally used in press mainly when the slide area and a mold are small.
• Use T-groove to easily change a mold.
• mold shall have U-groove.
• Use a horseshoe block to adjust the clamping height of a non-standard mold.
• Customization is available for the specific conditions of mold and press.
*Specifications:
| Type
Item |
SY-2 | SY-4 | SY-6 | SY-10 | SY-16 |
| Internal Pressure(kgf/aif) | 275 | ||||
| Maximum Operating Pressure(kgf/cnf) | 185 | ||||
| Commercial Clamping Force(ton) | 2.0 | 42 | 6.0 | 10.5 | 16.8 |
| Stroke (mm) | 5 | 5 | 7 | 8 | 8 |
| Required Flow Rate(mfi) | 5.6 | 11.7 | 24.2 | 46.7 | 74.8 |
| Operating TemperaturefC) | -5~60t | ||||
| Oil | Common Hydraulic Oil (ISO VG 32-46) | ||||
| Weight(kg)* | 1.2 | 2.2 | 3.5 | 6.3 | 12.2 |
Weight at H = 100mm
| Item Type |
a | b | d | F | G | J | Flow Rate | ||
| UNCLAMP | CLAMP | ||||||||
| SY-2 | 2 | 3.5 | 18 | 58 | 49 | 12 | 38 | 5.6 | 4.3 |
| SY-4 | 2 | 3.5 | 25 | 73 | 59 | 13 | 59 | 11.7 | 7.5 |
| SY-6 | 3 | 4.5 | 30 | 88 | 67 | 15 | 64 | 24.2 | 15.6 |
| SY-10 | 3 | 5.5 | 40 | 108 | 77 | 15 | 79 | 46.7 | 29.2 |
| SY-16 | 3.5 | 5 | 50 | 146 | 87 | 15 | 89 | 74.8 | 46.7 |
