Free-Bearing MICO QMC C-4HS/C8HS
Put a mold in place on a free bearing.
Clamp a top mold to a slide, and then clamp a bottom mold to lower a free bearing by the clamping force, so as to closely touch a bottom mold with the bolster (Or move a slide downward to closely touch a bottom mold with the bolster, so as to clamp a bottom mold).
If there is any hole or irregularity on the base plane of a mold, attach a steel sheet more than 3.2T to the base plane.
Additionally installing a free bearing on the plate that moves molds may reduce the manpower.
| FB-C-4HS | FB-C-8HS | |
| Lifting Force in Clamping | 40kg | 80kg |
| Maximum Lifting Force in Clamping | 90kg | 180kg |
| Self-Weight | Approx 360g | Approx 370g |
| Lifting System | Spring System | |
*Groove Size: mm
| Type
Item |
ØA | B | C | D | ØE | F |
| C-4HS | 44 | 40 | 5 | 45 | Ø44( +0.5;-0) | 43 (+0.2; -0) |
| C-8HS | 44 | 40 | 5 | 45 | Ø44( +0.5;-0) | 43 (+0.2; -0) |
*Load displacement:(kg)
| Type
Item |
0.5 | 1 | 1.5 | 2 |
| C-4HS | 60 | 70 | 80 | 90 |
| C-8HS | 120 | 140 | 160 | 180 |
