Auto clamp MICO QMC-AFSY style
AFSY type auto clamp is a semi – auto SY clamp attached with a chain, an air cylinder and a small motor, which allows automatic forward and backward movements.
No operator is needed to operate this movable slide clamp.
A compact design that introduces a hydraulic hose and a proximity switch cable built into a chain to eliminate the interference of a feed bar from a transfer line.
A slide roller chain in a movable part prevents the damage by vibration of press.
Mainly used in a large press to clamp a mold in place regardless of the mold size.
*Specifications:
| mall-Sized Motor Driven System | ||
| AFSY6 | AFSY10 | |
| internal Pressure(kgf/cm2) | 2′ | 15 |
| Maximum Operating Pressure(kgf/cnf) | 185 | |
| Commercial Clamping Force(ton) | 6 | 10.5 |
| Unclamping (kgf/cnf) | 3.7 | 3.9 |
| Required Flow Rate(mS) | 29.4 | 49.6 |
| Operating TemperaturefC) | -606 | |
| Oil | Common Hydraulic Oit (ISO VG 32-46) | |
(mm/inch)
| Item Type | E | F | G | I | K |
| AFSY-6 | 44 | 88 | 30 | 77 | Option |
| AFSY-10 | 54 | 108 | 40 | 94.5 | Option |
* Above specifications are subject to change without notice for further improvement in quality.
