Top motor type Kitagawa TUX.TU series
Description:
High performance range suitable for 5th axis machining on horizontal machining centres
High rigidity for heavy cutting
High accuracy
Top mounted motor position allows optimal machining area for horizontal 5 axis machining.
Air-hydraulic booster provides high clamping torque
Air-hydraulic booster or direct hydraulic clamping options available
Rotary joint options available
Rotary scale can be fitted to further increase accuracy.
Technical Specification:
| Model | TUX200 | TUX250 | TUX320 | ||
|---|---|---|---|---|---|
| Table Diameter (mm) | ø200 | ø250 | ø320 | ||
| Centre Hole Diameter (mm) | ø75H7 | ø105H7 | ø130H7 | ||
| Through Hole Diameter (mm) | ø52 | ø78 | ø110 | ||
| Centre Height (mm) | 140 | 180 | 225 | ||
| Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | ||
| Clamping Torque (N･m) (at pneumatic 0.45MPa /hydraulic 3.5MPa) |
600 | 1100 | 2600 | ||
| Motor Axis Reduced Inertia (kg･m2) | 0.00055 | 0.00068 | 0.001 | ||
| Total Reduction Ratio | 1/90 | 1/90 | 1/120 | ||
| Max. Rotation Speed (min-1) | 33.3 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
25 (at motor 3000min-1) |
||
| Allowable Work Inertia (kg･m2) | 0.50 | 0.98 | 2.24 | ||
| Indexing Accuracy (sec) | 20 | 20 | 20 | ||
| Repeatability (sec) | 4 | 4 | 4 | ||
| Mass of Product (kg) | 80 | 142 | 200 | ||
| Allowable Load | Horizontal (kg) | – | – | – | |
| Vertical (kg) | 100 | 125 | 180 | ||
| Manual Tailstock (as an option) | TS200RN | TS250RN | TS320RN | ||
| Tail Spindle (as an option) | MSR142A/TSR142A | MSR181A/TSR181A | TSR181A45 | ||
| Rotary Joint (as an option) | RJ40H20V02 Hydraulic/Pneumatic 4 ports |
RJ70H25V01 Hydraulic/Pneumatic 6 ports |
RJ70H32V01 Hydraulic/Pneumatic 6 ports |
||
