Die lifter MICO QMC-DL28 type
The application is similar to the DL50 series of mold lifting guide. However, the DL28 model has the following technical changes:
CYLINDER PICTH “CP”=L-(35*2)/A-I
ROLLER PITCH “RP”=50m/m
Allowable load off roller: 560kg/1ea
For a die lifter with “L” greater than 1400mm, combine 2-3 die lifters
| L(mm) | NUMBER OF CYLINDER ‘A’ | NUMBER OF ROLLER ‘B’ | CAPACITY AT (185kgf/cnf) |
| 300 | 3 | 6 | 615kg |
| 400 | 3 | 8 | 615kg |
| 500 | 4 | 10 | 820 kg |
| 600 | 4 | 12 | 820 kg |
| 700 | 5 | U | 1025kg |
| 800 | 5 | 16 | 1025kg |
| 900 | 6 | 18 | 1230kg |
| 1000 | 6 | 19 | 1230kg |
