Angle Milling Vise Vertex
2-Way Angle Milling Vise
|
Model |
A |
B |
C |
D |
G |
H |
Weight |
|
VWT-4 |
104 |
36 |
100 |
50 |
90 |
(C)22.6 |
|
|
VWT-6 |
154 |
51 |
300 |
50 |
121 |
(W)79.7 |
1. The same as characters of VH type. Swivel base same as VH type. Tilting degrees graduated easy reading. Swivel base graduated to 360˚ and fixable in any position. 2. Tilting seat set by two locking screws, works in high stability. Angle setting ranges from 0˚~ 50˚ 3. ACCURACY within 0.02mm. 3-Way Angle Milling Vise
|
Model |
Rộng |
A |
B |
H |
L |
Cao |
Weight |
|
VW-3 |
80 |
85 |
30 |
144 |
400 |
475 |
(C)16.7 |
|
VW-4 |
106 |
116 |
38 |
317 |
460 |
595 |
(C)32.7 |
|
VW-5 |
132 |
145 |
38 |
357 |
625 |
690 |
(C)49.4 |
1. Angles can be set in 3 dimensions. Swivels 360˚ around base. The vise can be elevated through 90˚ from the horizontal to vertical. And also can be tilted on its lower angle base up to 45˚ in both right and left. 2. Tilting of any angle all keep the workpiece steady, smooth. 3. Particually the clamping part of screw is strengthened by a bush made of gunmetal.
