Multiple-spindle type Kitagawa TMseries
기술:
다중 공작물 가공을위한 다중 스핀들 범위는 설정 시간을 줄이고 생산성을 높입니다.
모노 블록 바디 및 컴팩트 한 디자인
고속 회전이 가능한 태핑 기계에 이상적
택트 타임 감소
다중 공작물 가공
기술 사양:
| Model | TM2100 | TM3100 | TM2160 | TM3160 | ||
|---|---|---|---|---|---|---|
| Right-handed Type | ○ | ○ | ○ | ○ | ||
| Left-handed Type | ○ | ○ | ○ | ○ | ||
| Table Diameter (mm) | ø105 | ø105 | ø165 | ø165 | ||
| Centre Hole Diameter (mm) | ø50H7 | ø50H7 | ø50H7 | ø50H7 | ||
| Through Hole Diameter (mm) | ø32 | ø32 | ø40 | ø40 | ||
| Centre Height (mm) | 110 | 110 | 140 | 140 | ||
| Clamping Method | Pneumatic | Pneumatic | Pneumatic/Air-hydraulic /Hydraulic | Pneumatic/Air-hydraulic /Hydraulic | ||
| Clamping Torque (N･m) | at pneumatic 0.5MPa | 117 | 117 | 176 | 176 | |
| at air-hydraulic booster 0.45MPa /hydraulic 3.5MPa) |
– | – | 400 | 400 | ||
| Motor Axis Reduced Inertia (kg･m2) | 0.000353 | 0.000475 | 0.000145 | 0.000188 | ||
| Servomotor (for Fanuc spec.) | αiF 4/5000-B | αiF 4/5000-B | αiF 4/5000-B | αiF 4/5000-B | ||
| Total Reduction Ratio | 4th axis spec. (Fanuc spec.) | 1/36 | 1/36 | 1/90 | 1/90 | |
| M signal spec. | 1/36 | 1/60 | 1/90 | 1/120 | ||
| Max. Rotation Speed (min-1) |
4th axis spec. (Fanuc spec.) | 83.3 (at motor 3000min-1) |
69.4 (at motor 2500min-1) |
33.3 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
|
| M signal spec. | 83.3 (at motor 3000min-1) |
50 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
16.6 (at motor 2000min-1) |
||
| Allowable Work Inertia (kg･m2) |
0.054 | 0.054 | 0.51 | 0.51 | ||
| Indexing Accuracy (sec) | 60 | 60 | 30 | 30 | ||
| Repeatability (sec) | 5 | 5 | 4 | 4 | ||
| Mass of Product (kg) | 85 | 100 | 100 | 150 | ||
| Allowable Load | Horizontal (kg) | 60 | 60 | 160 | 160 | |
| Vertical (kg) | 30 | 30 | 80 | 80 | ||
| Manual Tailstock (as an option) |
TS2100RN | TS3100RN | TS2160RN | TS3160RN | ||
