3-spoke chuck Vertex VSK-A
Describe:
The VSK-A 3-spoke self-centering chuck of VERTEX uses tightening the part and transmitting the rotation to the circular part on the lathe.
PRODUCT CHARACTERISTICS OF VERTEX VSK-A 3-PIN CLAMP CLAMP:
– 3-pin chuck VSK-A has reversible clamps for clamping left or right (flip pin).
– Unlike the 3-pin VSC chuck, the claw of the 3-pin chuck VSK-A consists of 2 parts: the upper and the fixed bottom. Actuator fastened with fixed pin (engaged gear disc) by 2 bolts. So can reverse or replace the actuator easily. This is considered the advantage of the VSK chuck line.
– VERTEX 3-spoke VSK- chuck is suitable for clamping details such as aluminum, copper, low-hardness steel, …
– The replacement soft pins are: VSJ-4, VSJ-5, VSJ-6, VSJ-7 VSJ-8, VSJ-9, VSJ-10, VSJ-12, VSJ-16.
– The clamping interval shows the above table in 2 columns: O.D. RANGE (outside part diameter) and I.D. RANGE (part hole diameter).
Technical parameters:
ORDER NO. | D-Size | d1 | d2 | d3 | L | L1 | THREAD | GRIPPING RANGE | WEIGHT (kgs) | CODE NO. | |
O.D. RANGE | I.D. RANGE | ||||||||||
VSK-6A | 160mm(6″) | 142 | 130 | 45 | 95 | 71 | 3-M8 | ø3- ø 160 | ø 55- ø 145 | 8.3 | 5002-040A |
VSK-8A | 200mm(8″) | 180 | 165 | 65 | 109 | 78 | 3-M12 | ø 4- ø 200 | ø 65- ø 200 | 16 | 5002-042A |
VSK-10A | 250mm(10″) | 226 | 206 | 80 | 120 | 84 | 3-M12 | ø 6- ø 250 | ø 90- ø 250 | 21.7 | 5002-043A |
VSK-12A | 315mm(12″) | 285 | 260 | 100 | 156.5 | 102 5 | 3-M16 | ø 10- ø 315 | ø 100- ø 315 | 41 | 5002-043B |
VSK-13A | 325mm(13″) | 296 | 272 | 100 | 154.5 | 102.5 | 3-M16 | ø 11.5- ø 350 | ø 110- ø 340 | 45.8 | 5002-044A |
VSK-16A | 400mm(16″) | 368 | 340 | 130 | 181.5 | 129.5 | 3-M16 | ø 15- ø 400 | ø 120- ø 400 | 75.5 | 5002-046A |